HSS TOOL BIT BLANKS
• M2 (ZEDD), M35 (S100), M42 (S200), T42 (S400) grades of HSS Square & Round Dia 3mm to 25mm in lengths up to 300mm.
• S500 Cryogenic treatment for special applications. Flat Tool Bit Mark III (M35) & Parting Tool Bit Mark II (M2) available in std size & Length above Tools available in T42 Customer made Form Tools like Trepanning, Knife, Radius. Butt Welded, Brazed, Flat, Circular & Engraving. All Square Tools are supplied with end bevel angle of 15° Special Size and tolerances as per specifications.
Bandsaw Blades in Ahmedabad, Bandsaw Blades in India, Bimetal Bandsaw Blades in Ahmedabad, Bimetal Bandsaw Blades in India
 
HSS DRILLS
• M2, M35 & M42 grades of HSS as per IS. Miranda Gold Dia 1 to 20mm, Miranda Super Dia 3 to13mm. ` Parallel Shank Stub & Jobber Series Dia 1 to 20mm. Parallel Shank Long Gold Series Dia 3to16mm Parallel Shank Extra long Series Dia 3 to 12.50mm OAL 300mm.
• Taper Shank Drills Dia 3 to 76mm. Taper Shank Long Series Dia 5 to 50mm. Taper Shank Extra Long Series Dia 10 to 50mm OAL 500mm. Centre Drill as per IS Type Type "B" and Type Masonary Drills Dia 3 to 13mm. Special application Drills such as Crank Shaft, Web Thinned, High/Low helix, Double angle, Split Point as per Drawing etc.
Bandsaw Blades in Ahmedabad, Bandsaw Blades in India
 
HSS TAPS
• M2, M35 & M42 Grades of HSS. As per IS / DIN / ISO / JIS / BS Standards. Straight, Spiral flute and Spiral point geometry. Right hand / Left hand Taps.
• Hand & Short Machine Taps. Long Shank Machine Taps. Nut/ Nib / Nipple. Special Taps as per drawing / application. Available Size from M1 to M100mm Coarse Pitch & Fine Pitch. Blue tempered / Nitrided / Cryogenic treated /Tin /TiCN /TiAIN and different coated taps available on demand.
Bimetal Bandsaw Blades in India
 
HSS ENDMILLS, REAMERS & ANNULAR CUTTERS
M2 & M42 grades of HSS as per IS, BS, DIN, ISO &American standard.
• ENDMILLS
Available in 2,3,4 & 8 flutes depending on diameter.
Inches / Metric sizes from 3mm to 50mm Dia (1/8" to 2")
& Length up to 400 mm (16")
Center Cutting, Non Center Cutting & Roughing types.
Square, Concave, Radius or Ball nose end type.
• REAMERS
Available in Parallel Shank & Taper Shank Hand & Machine Reamers.
Parallel Shank & Taper Shank Chucking Reamers.
M2 Taper Shank Machine Bridge Reamers & Jig Reamers.
Hand & Machine Taper Pin Reamers.
Taper Shank Socket Reamers Type "A", "B" & "C".
Taper Shank Core Drills.
Shell Reamers.
• ANNULAR CUTTERS
Available Sizes from 12 to 62mm with Depth of cut 25 to 50mm.
 
HAND AND POWER HACKSAWS
• HSS, Bimetal Handsaw & Powersaw

Range : Handsaw
Metric : Length : 250mm (10")to 300mm (12").
      &     Width : 12.50 (1/2").
Inches Thickness : 0.63mm.
TPI : 14, 18, 24, 32.
Range : Powersaw
Metric : Length : 300mm (12") to 900mm (36").
& Width :25mm (1"), 32mm (1.1/4"),
Inches 40mm (1 .1/2"), 50mm (2").
Thickness : 18G, 16G, 14G, 12G.
TPI : 4,6,10,14.
 
METAL CUTTING BANDSAW BLADE
• Carbon Steel

Range :
Metric : Length : 30.5Mtrs
Width : 6.5, 10, 13, 16, 19, 25mm.
Inches: Length : 100ft
Width : 1/4", 3/8", 1/2", 5/8", 3/4", 1"
T.P.I : 4, 6, 8, 10, 14, 18.
Welded Loops can also be supplied in any size & length.

 
BIMETAL BANDSAW BLADE

Miranda Tools markets ULTRA’S MADE IN FRANCE
Bi-metal Bandsaw Blades in Ahmedabad, India.
Furia : M42 grade, Multipurpose blade designed to cut all kinds of steels, both ferrous and non ferrousmetals, in all dimentions and shapes.
Alumina : M42 grade, Perfectly suitable for sawing of aluminium blocks, trimming cast moulding and cutting aluminium profiles in bundle operations.
Titan : M51 grade, Suited for cutting exotic and highalloyed steels.
Ultima :ASP grade, Perfectly suitable for bearing steel & stainless Steel.